The TCH horizontal clamp consists of two clamps with a two-legged chain system. It is especially suited for the transport of single plate with a minimum thickness of approximately 5mm as well as for plate bundles. NOTE: The top angle between the chain/rope legs must not exceed 90°.
Model TBP 0.5 TBP 1 .5 Capacity lonnes 0.5 1.5 Jaw opening mm 0-10 0-20 Weight kgs 3.5 12.0 The TBP is suitable for the lifting, turning and transporting of plates with a sensitive surface without leaving behind indentations. It can be used for aluminium S stainless steel plate or those with an extremely hard surface. NOTE: The surface of the plate must be free of oil, grease or any other liquid to ensure safe transport.
Model TBE 0.5 TBE 1.0 TBE 2.0 TBE 3.0 TBE 4.0 Capacity tonnes 0.5 1.0 2.0 3.0 4.0 Jaw opening mm 0-10 0-16 0-20 0-20 0-20 Weight kgs 5.0 12.0 22.0 27.0 32.0 The TBE plate clamp has an extremely high clamping pressure. This makes the clamp particularly suited to the transport of plate with surface hardness up to HRC 40/Brinell 375.
Capacity kgs 500 Weight kgs The TFK barrel clamp is suited for the transport of upright barrels with a bead. Its light weight and small overall design makes it ideal for picking up barrels that sil lightly on pallets. The centre of gravity of the barrel is the lifting point during transport.
Model TFRK Capacity kgs 500 Weight kgs 1.2 The TFRK barrel rim clamp can be used individually, as a pair, or as a multi-chain system and is designed for Ihe transport of upright barrels. The clamp grabs under the rim of the barrel and a spring-loaded earn prevents the accidental opening of the clamp.
Hi. I'm one of the directors at
Is there a particular lifting appliance or service I can help you with?
Thanks for your message or question.
I'll get back to your shortly. I look forward to chatting more with you.